FAQ
©2019 AS Americas, Inc. 3
How long is the drying cycle?
The drying cycle is approximately 4 minutes but it can be stopped at any time by pressing the stop button.
How many dierent water temperature settings are available?
There are 6 dierent levels (Including OFF) of water temperature settings on the Advanced Clean™
100 SpaLet® toilet.
How many heated seat temperature settings are available?
There are 6 dierent levels (Including OFF) of heated seat settings on the Advanced Clean 100 SpaLet toilet.
How many water pressure settings are available?
There are 6 dierent levels of water pressure settings are available on the Advanced Clean 100 SpaLet toilet.
What are the dierent spray patterns?
There are 6 dierent spray patterns: Back Cleansing, Back Cleansing-mild, Back Oscillation,
Back Massage, Front Cleansing, Front Oscillation.
What is Oscillation?
Oscillation spray moves the nozzles forwards and backwards continuously allowing for a wider area
to be cleansed.
What is the temperature of the heated seat?
Depending on the use of the ECO mode, the temperature of the seat can vary. If the Eco Mode Power
Savings is being used the seat will be at room temperature and begin to heat up only after the user initiates
using the bidet seat. If Eco Mode is not being used the temperature ranges from approx. 82.5°F–97°F
(approx. 28°C–36°C).
What is the temperature of the water?
There are 6 levels of adjustment ranging from 89.5°F–104°F (32°C–40°C): if the heating function is set to
OFF the water will be at an ambient temperature.
What is the temperature of the warm air dryer?
The temperature of the warm air dryer ranges from approx. 104–131°F (40–55°C).
Does this have an automatic seat? Slow -close seat?
Yes, this SpaLet toilet is equipped with an automatic open/slow-close lid and seat for users convenience.
How long does the heated seat stay warm?
You can set the seat to be warm all the time if you do not use the ECO function. If you use the eco power
saving mode it shuts the water and seat heater o for 8 hours then restores the power. If High Eciency
Power savings is used it turns the water and seat heater o until the product is back in use.
Explain the power save function, how does it work?
It reduces power consumption by turning o the water and seat heater for 8 hours. The power settings
are automatically restored after 8 hours.
How does the heated water supply work, where do I get the warm water from?
The incoming water is transferred through an instant water heating element that keeps the water warm
on a continuous basis during use.
How long does the heated water last for?
The Advanced Clean 100 SpaLet toilet has instant heat so the warm water does not run out.
Where does the water come from that the bidet function uses?
The clean water comes from the incoming water supply line.
Does this toilet have a nightlight?
Yes it has a nightlight. When the sensor detects a user, a soft light illuminates the inside of the bowl and
user’s foot area. When the user leaves the SpaLet, the light goes out automatically after about 1 minute.