Specifications
Page 20
Milan Supply Company/Milan Engineered Systems
S Series Simplex Control Panels
Simplex control panels can be used for pressure sewer (STEP) systems, onsite treatment systems, and pump
control into conventional gravity or pressurized drain elds. “S” series pump control panels are a popular
choice for a simplex pump and alarm system. These panels include a motor contactor, which increases system
life by reducing the load requirements on the oat switches. “S” Series panels also allow options such as a pro-
grammable timer or use of larger horsepower pumps.
MVP-S Series Simplex Control Panels
Orenco’s digital programmable MVP control panels are speci cally designed for use with ef uent pumping and
onsite treatment systems, when pumping from point “A” to point “B.” All MVP panels include an easy-to-use,
programmable logic unit that incorporates many timing and logic functions, such as multiple timing intervals
to adjust for changing ow conditions. MVP panels offer several functions as standard, including elapsed time
meters, counters, digital indication of oat switch status, different alarm/light signals for varying alarm condi-
tions, and the ability to use one oat switch type for all functions. The panels include motor contactors and
accept all standard options.
VeriComm Telemetry Control Panels (VCOM)
VeriComm® control panels and the VeriComm Monitoring System are integral components of a complete
remote monitoring system and cannot be ordered separately from each other.
Orenco’s VeriComm® line of affordable telemetry control panels, coupled with the VeriComm web-based
monitoring system, has been designed speci cally for decentralized wastewater collection and treatment for
residential systems. VeriComm gives wastewater system operators and service providers the ability to remotely
monitor and control each individual site’s performance, saving money on operation and maintenance while
remaining virtually invisible to the homeowner.
In addition to including all the features of a standard panel for the same application, VeriComm panels include
a number of very “smart” features:
• Communication and alarm management;
• Three operating modes (“start-up” and “test” modes, as well as a “normal” mode);
• Data collection and logs;
• Troubleshooting and diagnostic logic; and
• Advanced control logic to keep system operating normally in the event of oat failures.
All VCOM panels have elapsed time meters and counters, which are built into the telemetry unit and are view-
able via Internet and direct connection with a laptop or Pocket PC® device (Bluetooth® Kit required). VCOM
panels share existing phone lines, and include a DSL lter/surge arrestor for the phone line as a standard fea-
ture. They also have the ability to use one oat switch type for all functions.
Orenco Custom Control Panels
Orenco’s most notable lines of custom control panels include the following:
PLC Panels
For large systems, when the requirements of a system are greater than an MVP panel can handle, a custom
PLC panel is a good option. PLCs have virtually unlimited memory and a larger number of inputs and outputs
available to panel designers. In addition to including many of the same features as standard MVPs (such as
digital timing and indication of input and output status), PLC panels also have multiple options for operator
interfaces, from two-line text displays to color touch-screen graphical displays. PLCs support many communi-
cation protocols and can be interfaced with a variety of systems.
TCOM Panels
Orenco TeleComm™ (TCOM) panels are cost-effective, integrated panels that include digital control, data log-
ging, and remote access and control in real time. They are ideal for stand-alone monitoring and control systems.
Alarm noti cations are sent to numeric pagers. Panels can be accessed directly at the site with our Bluetooth
Kit, a null-modem cable, and a laptop, or remotely using a computer with a modem. TCOM panels require a
dedicated phone line. TCOM panels share some of the control features of our standard VCOM panels, but the
monitoring interface is not Web-based. HyperTerminal™ or a similar VT100 terminal emulator (commonly
bundled with most computer operating systems) is all you will need to communicate with TCOM panels; no
special computer software is required.
S1ROHTETMCT Panel SEW20690
S1HTETMCT Panel SEW20710
MVP-SIPTROHT/ Simplex Timer Panel SEW20722
VCOM S1ROHT Panel Simplex 115V SEW20785
Consult your Milan Rep for
Custom Panel Specs