Installation Guide

- 7 -
791679-100 Rev. C 1/18
5B
6
APPLY SEALANT
INSTALL COUNTERTOP
INSTALL FAUCET (not included)
8
7
B
C
ASSEMBLE AND INSTALL P-TRAP (not included) AND DRAIN CONNECTIONS
For Under Mount Sinks: Carefully wipe clean
the sink apron and top rim free from all debris.
Ensure that the surface on underside of
countertop cutout opening is smooth and free
of debris. Under mount installation requires a
generous bead of sealant around the sink top
rim where sink and countertop underside will
make contact.
Carefully position and install the countertop. Ensure the sealant provides a complete seal between the sink and
the countertop surface. Fill any voids and wipe excess away with soft damp cloth.
Assemble and install P-trap drain connections in accordance
with manufacturer’s instructions. Connect trap to drain
assembly hand tight to check alignment. It may be
necessary to cut off part of the tailpiece (area "B") or part of
the horizontal leg of the trap (area "C"). Secure joints for
watertight assembly.
Carefully locate and install faucet to countertop in accordance with manufacturer’s instructions.
Ensure you provide adequate clearance for supply lines and faucet operation.
Connect supply lines to shutoff valves. Turn on water supply valves and water-test installation.
TOP OF CABINET
APPLY SEALANT
ON TOP THREE
SIDES OF RIM