Installation Guide

MOUNTING OPTIONS
REPLACEMENT USE
Flush Mount
Installation *
Under Mount
Installation *
COUNTERTOP
When replacing an original unit be sure to shut off water supply before removing the lavatory or
disconnecting water supply lines and drain fittings. Original supplies and shutoff valves should be
replaced on installation.
Sink can accommodate any standard 3-1/2" (89mm) sink outlet drain.
- 2 -
791679-100 Rev. C 1/18
INSTALLATION PROCEDURES
Typical installation includes cabinet support preparation, installation of faucet, connection of flexible water
supply lines, attachment of sink to cabinet, sizing and installation of drain, supplies to house water system.
Sink Mounting Provisions – Whether the sink is used for replacement or new installation, the cabinet area
beneath the sink must be reinforced to provide sufficient support.
CABINET SUPPORT PREPARATION
Important Note:
It is recommended that the installation be performed by a professional and shall be in accordance with all
local plumbing and building code requirements.