Installation Guide

- 3 -
M965854 (8/17)
2
4
INSTALL ADJUSTABLE SHOWER BAR
• Remove HAND SHOWER (1) from the hose. Turn water
supplies on to flush water lines thoroughly.
• T u r n handles “off” and replace HAND SHOWER (1).
• Use KNOB (3) on HOLDER (2) to adjust
HAND SHOWER (1) height on slide bar.
INSTALL HOSE AND HAND SHOWER
30"
(765 mm)
C/L
C/L
1
3
2
C/L
2
3
1
• Remove CAP (1) from SHOWER RAIL (2).
• Secure SHOWER RAIL (2) to the wall using MOUNTING
SCREWS (3). Do not fully tighten. After alignment is made,
tighten the MOUNTING SCREWS (3) fully.
• Instal CAP (1) back onto SHOWER RAIL (2).
3
• Supply to WALL SUPPLY is 1/2" NPT. See rough-in above
for detailed information.
• Apply sealant or sealing tape to threads of 1/2" NPT supply
nipple.
INSTALL WALL SUPPLY
1/2" NPT
APPLY SEALANT
OR SEALING TAPE