Installation Instructions

pg12
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
“Low” uid light indicator has not
been reset
Tank top has not been secured
with the locking knobs
Tank top has not been secured
with the locking knobs
Batteries are defective or depleted
Batteries are defective or depleted
Follow the ActiClean
™
System Instructions
“To Install New Toilet Cleaning Cartridge”
on page 9.
Ensure tank top is securely fastened to china
tank with by turning locking knobs to the
"Locked" position.
Ensure tank top is securely fastened to china
tank with by turning locking knobs to the
"Locked" position.
Remove batteries and reinstall; ensuring batteries
are installed in the correct orientation (follow the
pattern in the battery receptacle). If batteries are
installed correctly and the device is still not
functioning properly, please install four new
AA alkaline batteries.
Remove batteries and reinstall; ensuring batteries
are installed in the correct orientation (follow the
pattern in the battery receptacle). If batteries are
installed correctly and the device is still not
functioning properly, please install four new
AA alkaline batteries.
“Low” uid light is illuminated
even when cartridge is still full
Tank top lifts away from
china tank when a cleaning
cycle has been activated
The bowl does not ll up with
water when a cleaning cycle
has been completed
No lights are illuminated
when device is activated
for either quick or deep
clean cycle
The cleaning system is
not working properly or
works intermittently
ActiClean
™
Unit Troubleshooting Guide