Technical Specifications

J28
© 2019 AS America Inc.
spec_0297800 Town Square S ped sink Rev 1 5/19
TOWN SQUARE
®
S
PEDESTAL SINK
FINE FIRECLAY
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAPS ARE SUGGESTED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE.
FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
SUPPLY
AS REQ'D
1-1/4" O.D.
WASTE
1-1/4" O.D.
TAILPIECE
SUPPLY
AS
REQ'D
8-5/8"
(220 mm)
2-3/4"
(70 mm)
22-1/2"
(571 mm)
30"
(761 mm)
FAUCET MOUNTING HOLES:
SINGLE HOLE 4" (102 mm)
OR 8" (203 mm)
9-1/2"
(240 mm)
*
22-3/4"
(578 mm)
*
20-1/2"
(521 mm)
35-3/16"
(894 mm)
*
8"
(203 mm)
29-3/16"
(741 mm)
■ 2-3/8"
(60 mm)
9/16"
(15 mm)
35-3/16"
(894 mm)
34-3/8"
(874 mm)
6-1/2"
(165 mm)
■ 2-3/8"
(60 mm)
24-1/2"
(621 mm)
22-1/2"
(571 mm)
9-1/8"
(231 mm)
18-5/8"
(473 mm)
■ 7-1/4" (185 mm)
FOR ANCHOR
SCREW MOUNT
■ 7-1/4" (185 mm) FOR
ANCHOR SCREW MOUNT
*
8"
(203 mm)
*
20-1/2"
(521 mm)
*
22-3/4"
(578 mm)
5-1/2"
(140mm)
640mm
(25-1/4")
*
20-1/2"
(521 mm)
PEDESTAL SINK
TOP VIEW
PEDESTAL SINK
WITH LEG
PEDESTAL SINK WITH CONSOLE