Instructions / Assembly

American Spa Owner’s Manual

LTR50001143, Rev. ZZ4

Preparing for Your New Portable Spa

Opening the Front Door Panel for Electrical Hookup

The following electrical connections must be performed by a licensed electrical contractor. Unscrew

and remove the two corner panels on each side of the spa’s front door.

Remove the front door panel.

Pictured to the right is the inside of the spa behind the

front door. The electrician now has access to connect

the spa for power. While the front door is o, refer

to page 10 for instructions on ensuring the plumbing

ttings are secure (but do not be tempted to over-

torque or over-tighten these ttings).

Reattach and screw panels back in. (Front door is

installed rst, then install the corner panels.)

Note that the drain pipe is internal to

the cabinet.