Instructions / Assembly

American Spa Owner’s Manual

LTR50001143, Rev. ZZ4

Sound System and Perimeter Lighting

Using the Freedom Sound System

The Freedom Sound System

™

entertainment option contains a Bluetooth-enabled speaker system that is available

for certain Cal Spa models. Any Bluetooth-enabled device can be used to play audio through your spa.

Before you can use the sound system, you need to pair the Bluetooth module with your device. The Bluetooth

module is installed within the spa cabinet. Everything can be done with your device. The example shown below is from

an iPhone device. Your device may appear dierently. Before you begin, make sure Bluetooth in enabled on your device.

1. Select Bluetooth from your device’s option list.

2. Select SWA8-6BT... from the list of available devices to pair.

3. Your iPhone device will ask for a code: the code is 0000.

4. Allow your device to pair with the spa’s Bluetooth module.

5. When the devices have been connected, the device SWA8-6BT... will be highlighted.

Only one Bluetooth device can be paired with the Freedom Sound System

™

at any time.

(For Android users, the systems will pair automatically - no code is needed.)

Once your device is paired and connected, all sounds from your device will be played through the sound system,

including system sounds and telephone.

1 2 3 4

LED Lighting

Press the LIGHT button on the topside control panel to turn the spa light on. If your spa has perimeter LED

lights, they will also light up at the same time as the spa light.

The LEDs operate in three modes:

1. Cycle: When you continually press the LIGHT button, the LEDs will cycle through the three main LED colors

(Red, Green, and Blue) or combinations of the three that produce the following colors: light green, purple,

light blue, yellow, etc.

Each time you press the button, you immediately advance to the next color in sequence or eventually a

dierent light pattern.

2. Flashing: When you are cycling through all the colors, the next time you push the LIGHT button, the LED

lights may start ashing. This is another normal operational pattern option.

3. Fading cycle: The next phase of operation when you push the LIGHT button is a slow and/or fast fade

random transition from one color to the next.

Spas with exterior corner LED lighting generally work in the same mode as described above. The variations in

color and patterns provide you with multiple options to suit almost any lighting preference.