Full Product Manual

American Spa Owner’s Manual

LTR50001143, Rev. AW

Preparing for Your New Portable Spa

Opening the Front Door Panel for Electrical Hookup

The following electrical connections must be performed by a licensed electrical contractor. Unscrew

and remove the two corner panels on each side of the spa’s front door.

Then, unscrew and remove the front door panel.

Pictured to the right is the inside of the spa behind the

front door. The electrician now has access to connect

the spa for power. While the front door is off, refer

to page 11 for instructions on ensuring the plumbing

ttings are secure (but do not be tempted to over-

torque or over-tighten these ttings).

Note that the drain pipe (left photo) is internal and remains within the spa cabinet during normal use. Once the

electrical work is done, reattach and screw panels back in. (Front door rst, then corner panels)