Installation Guide

American Pro Decor assumes no liability for improper installation.
Clean the wall and locate the studs
in the wall.
The beam has to fit perfectly, if not,
you will need to fill the extra space
with wood. Measure the negative
space. This will show you how thick it
has to be.
Use screws to fasten a joist hanger
to the wall
Screw wood blocks on the support
structure.
Lightly push the lumber into the joist
hanger. This structure will support your
beam. Secure the lumber with screws.
Slide your beam onto the support
structure. The beam should fit
perfectly.
Screw the beam to the support
structure. For the best result,
use screws with small heads
(trim head screws).
7.
6.5.4.
1. 2. 3.
Installation Instructions for Suspended Beams - Wall-to-Wall