Installation Guide

American Pro Decor assumes no liability for improper installation.
Draw a light pencil line perpendicular to the center of
the beam strap.
Apply a bead of adhesive to the back of the strap.
Lay the strap along the beam. Make sure that the straps
three bolt heads are even on the top of the beam.
Use a pencil to mark your trim line and cut the strap along
the trim line with scissors to fit to the beam.
Align the center of the strap with the marks made in Step 1.
Press firmly on the strap working from the center up each
side to ensure good contact between the adhesive and the
beam.
NOTE: Use finishing nails to secure the strap to the beam
to allow the adhesive to set.
1.
3. 4.
2.
Installation Instructions for Flexible Beam Straps
Unfinished Beam ProgramUnfinished Beam Program
Simply make your selection from the many
gel stain nishes that best suits your room.
Create your own colorCreate your own color
For our full selection of Faux Wood Beams
and Accessories visit us online at www.outwater.com
• Single and Double Straps
• Brackets
• Touch-Up Stain
Additional
Accessories