Installation & Assembly

5 / 8
to fasten the bars #4 and #5.
Step 5: Insert leg poles ( #3) into one side as shown below and put the roof cover on
the frame.
Step 6: Lift the opposite site of the frame and insert remaining leg poles (#3) to finish the
tent framework. And tie down with bungee balls as shown.Take care of the tension of the long
bungee balls ,for if you use too many on one side of tent ,it may too tight to tie the other side of it .
Tips: Tie in the bungee-balls 5 at one side followed by 5 in the other and continue until