User manual

ASMB-782 User Manual 36
system. It does this by creating virtual machines, each running its own x86 operating
system.
3.4.4 SATA Configuration
Figure 3.9 SATA Configuration
SATA Controller(s)
This item is to enable or disable SATA devices.
SATA Mode Selection
It's able to set as IDE, AHCI, or RAID when SATA Controllers are enable.
SATA Controller Speed
To set the maximum speed of SATA controllers, and there are three modes, Gen1,
Gen2, and Gen3.
Port 0~5
To enable or disable SATA port 0~5.
Port 0~5 Hot Plug
To designate dedicated SATA port as hot pluggable.
Port 0~1 SATA Device Type
To identify the SATA is connected to Solid State Drive or Hard Disk Drive.