User manual

9 ASMB-782 User Manual
Chapter 1 Hardware Configuration
1.8.1.3 Watchdog timer output (JWDT1)
The ASMB-782 contains a watchdog timer that will reset the CPU. This feature
means the ASMB-782 will recover from a software failure or an EMI problem. The
JWDT1 jumper settings control the outcome of what the computer will do in the event
the watchdog timer is tripped.
1.8.1.4 Deep Sx Mode (JGREEN1)
The ASMB-782 contains a jumper that can support energy saving for BIOS deep Sx
feature. Normally this jumper should be set with pin 1-2 closed. If you want to disable,
set JGREEN1 to 2-3 closed for disable.
Table 1.5: Watchdog timer output (JWDT1)
Function Jumper Setting
*Reset
NC
* default setting
Note! The interrupt output of the watchdog timer is a low level signal. It will be
held low until the watchdog timer is reset.
1-2 closed
123
2-3 closed
123
Table 1.6: Deep Sx Mode (JGREEN1)
Function Jumper Setting
*Enable
Disable
1-2 closed
123
2-3 closed
123