Specifications

BXT7059 / BXTS7059 Technical Reference Chipset Configuration Setup
Memory configuration parameters continued:
Patrol Scrub: Disabled/Enabled
Demand Scrub: Disabled/Enabled
Data Scrambling: Disabled/Enabled
Device Tagging: Disabled/Enabled
Rank Margin: Disabled/Enabled
Thermal Throttling: Disabled, OLTT, CLTT
OLTT Peak BW %: valid values are between 25 and 100, Default = 50
Altitude: Auto, 300M, 900M, 1500M, 3000M
Serial Message Debug Level: Disabled, Minimum, Maximum, Trace, Memory
Training
DIMM Information: This is an informational menu screen that displays the
memory channels and nodes for each processor along with any DIMM
information that is read by the BIOS during the boot process.
South Bridge Configuration
The upper porting of the menu screen provides PCH product code name and the stepping of the particular
Intel® C604 PCH this is installed on the board. Accessing the South Bridge Configuration option allows
the user to do configure the following parameters:
Option
Description
PCH Compatibility
RID
Disabled/Enabled is the option parameter choice for this selection. Any option
selection listed with bold text indicates that this is the BIOS default setting.
SMBus Controller
This option allows the user to enable or disable the SMBus Controller in the
Intel® C604.
SW SMI Timer
Disabled/Auto
GbE Controller
Disabled/Enabled - This internal controller provides the LAN interface that is
routed via the Intel® 82579LM Ethernet PHY to board’s edge connector C for
use on a PICMG 1.3 backplane. This setting does not affect the operation of the
independent Intel® i350 Ethernet Controller that drives the two LAN ports on
the SHB’s I/O plate.
Wake on LAN from
S5
This option allows the user to enable or disable wake on LAN feature derived
from an ACPI S5 shutdown event
USB WakeOnDev
insertion
Disabled/Enabled
Restore AC Power
Loss
This option allows the user to determine how the system will come back up
when power is restored after an unplanned power interruption. The available
options are: Power Off, Power On or Last State.
SLP_S4Assertion
Stretch Enable
Disabled/Enabled
The following sub-menu selection is available when this parameter is enabled:
SLP_S4 Assertion Width: 1-2 seconds, 2-3 seconds, 3-4 seconds, 4-5 seconds
Deep Sx
This setting supports the deep sleep S4 and S5 states primarily used in mobile
devices. The available options include: Disabled, Enabled in S5(Battery),
Enabled in S5, Enabled in S4 and S5(Battery), Enabled in S4 and S5
Disable SCU Devices
Disabled/Enabled
Onboard SAS
Oprom/Driver
Disabled/Enabled
Onboard SATA
RAID Oprom/Driver
Disabled/Enabled
High Precision Event
Timer
Disabled/Enabled
3-3 Trenton Systems Inc.