Specifications

BXT7059 / BXTS7059 Technical Reference Advanced Setup
Serial Port Console Redirection Configuration
The SHB must have an optional IOB33 installed in order for this BIOS setting to apply. Serial port console
redirection is available for use on the IOB33’s COM0 and COM1 serial communication ports.
Option
Description
Console
Redirection
Settings
Use this setting to specify how the system is to re-direct data to the out-of-band
management port.
Out-of-Band Management Port: COM0, COM1(PCI Bus, DEV0,FUNC0) (Disabled)
Terminal Type: VT100. VT100+, VT-UTF8, ANSI
Bits per second: 9600, 19200, 57600, 115200
Flow Control: None, Hardware RTS/CTS
Data Bits: Fixed at 8
Parity: Fixed at None
Stop Bits: Fixed at 1
COM0
Console
Redirection
Enabled/ Disabled -- Default setting is Enabled. Note: The console redirection
settings shown below will be unavailable if the Disabled option is selected.
COM0
Console
Redirection
Settings
Use this setting to specify how the host computer and the remote computer will
exchange data via the COM0 port. Both computers need to have compatible settings.
Here are the available COM0 settings:
Terminal Type: VT100, VT100+, VT-UTF8, ANSI
Bits per second: 9600, 19200, 38400, 57600, 115200
Data Bits: 7, 8
Parity: None, Even, Odd, Mark, Space
Stop Bits: 1, 2
Flow Control: None, Hardware RTS/CTS
VT-UTF8Combo Key Support: Disabled, Enabled
Recorder Mode: Disabled, Enabled
Resolution 100x31: Disabled, Enabled
Legacy OS Redirection: 80x24, 80x25
Putty Keypad: VT100, LINUX, XTERMR6, SCO, ESCN, VT400
Redirection After BIOS: Always Enable, BootLoader
COM1
Console
Redirection
Enabled/ Disabled -- Default setting is Enabled. Note: The console redirection
settings shown below will be unavailable if the Disabled option is selected.
COM1
Console
Redirection
Settings
Use this setting to specify how the host computer and the remote computer will
exchange data via the COM1 port. Both computers need to have compatible settings.
Here are the available COM1 settings:
Terminal Type: VT100, VT100+, VT-UTF8, ANSI
Bits per second: 9600, 19200, 38400, 57600, 115200
Data Bits: 7, 8
Parity: None, Even, Odd, Mark, Space
Stop Bits: 1, 2
Flow Control: None, Hardware RTS/CTS
VT-UTF8Combo Key Support: Disabled, Enabled
Recorder Mode: Disabled, Enabled
Resolution 100x31: Disabled, Enabled
Legacy OS Redirection: 80x24, 80x25
Putty Keypad: VT100, LINUX, XTERMR6, SCO, ESCN, VT400
Redirection After BIOS: Always Enable, BootLoader
iSCSI Configuration
Option
Description
iSCSI Initiator
Name
Enter a unique name for the iSCSI initiator. After entering a unique name the
following iSCSI setup parameters may be entered:
Add an attempt, Delete an attempt and Change attempt order
2-9 Trenton Systems Inc.