User`s guide

82 KTC5520/EATX
www.kontron.com
5.1.7.1.5 VLAN ID sub-menu
5.1.7.1.6 VLAN Priority sub-menu
Feature Options Description Setup Help
Channel Number
Each interface has a channel number that is
used when configuring the channel and for
routing messages between channels.
The channel number assignments are
described in IPMI Specification 1.5, table 6-1.
Enter Channel Number
for SET LAN Config
Command.
Proper value below 16.
Channel Number Status Valid or Invalid Display Valid if IPMC support LAN Channel. N/A, display only.
802.1q VLAN ID Value
VLAN ID value in
decimal. VLAN ID must
be between 1 and 4094.
Enter VLAN ID value in
decimal. VLAN ID must
be between 1 and 4094.
Current 802.1q VLAN ID
Value
xxx
Display the current 801.1q VLAN ID
configuration stored in IPMI NVRAM for IPMI
LAN.
N/A, display only.
VLAN Tagged Packets
Status
Enabled or
Disabled
Display the current status of the 801.1q VLAN
tagged packets configuration stored in IPMI
NVRAM for IPMI LAN.
N/A, display only.
Feature Options Description Setup Help
Channel Number
Each interface has a channel number that is
used when configuring the channel and for
routing messages between channels.
The channel number assignments are
described in IPMI Specification 1.5, table 6-1.
Enter Channel Number
for SET LAN Config
Command.
Proper value below 16.
Channel Number Status Valid or Invalid Display Valid if IPMC support LAN Channel. N/A, display only.
Current VLAN Priority
Value
x
Display the current 801.1q VLAN Priority
configuration stored in IPMI NVRAM for IPMI
LAN.
N/A, display only.
802.1q VLAN Priority
Value
VLAN Priority
value in decimal.
Proper value below 8.
Enter VLAN Priority
value in decimal.
Proper value below 8.