User`s guide

81 KTC5520/EATX
www.kontron.com
5.1.7.1.2 MAC Address sub-menu
5.1.7.1.3 Subnet Mask sub-menu
5.1.7.1.4 Gateway Address sub-menu
Feature Options Description Setup Help
Channel Number
Each interface has a channel number that is
used when configuring the channel and for
routing messages between channels.
The channel number assignments are
described in IPMI Specification 1.5, table 6-1.
Enter Channel Number
for SET LAN Config
Command.
Proper value below 16.
Channel Number Status Valid or Invalid Display Valid if IPMC support LAN Channel. N/A, display only.
Current MAC Address xx.xx.xx.xx.xx.xx
Display the current MAC Address stored in IPMI
NVRAM for IPMI LAN.
N/A, display only.
Feature Options Description Setup Help
Channel Number
Each interface has a channel number that is
used when configuring the channel and for
routing messages between channels.
The channel number assignments are
described in IPMI Specification 1.5, table 6-1.
Enter Channel Number
for SET LAN Config
Command.
Proper value below 16.
Channel Number Status Valid or Invalid Display Valid if IPMC support LAN Channel. N/A, display only.
IP Address Source
Static
DHCP
Configure Subnet Mask from DHCP.
Select IP Address
Source:
Static or DHCP
Current Subnet Mask xxx.xxx.xxx.xxx
Display the current Subnet Mask configuration
stored in IPMI NVRAM for IPMI LAN.
N/A, display only.
Subnet Mask Enter
This allows setting of a Subnet Mask for LAN
configuration.
Enter for Subnet Mask
Configuration.
Feature Options Description Setup Help
Channel Number
Each interface has a channel number that is
used when configuring the channel and for
routing messages between channels.
The channel number assignments are
described in IPMI Specification 1.5, table 6-1.
Enter Channel Number
for SET LAN Config
Command.
Proper value below 16.
Channel Number Status Valid or Invalid Display Valid if IPMC support LAN Channel. N/A, display only.
IP Address Source
Static
DHCP
Configure Gateway address from DHCP.
Select IP Address
Source:
Static or DHCP
Current Gateway Address xxx.xxx.xxx.xxx
Display the current Gateway configuration
stored in IPMI NVRAM for IPMI LAN.
N/A, display only.
Gateway Address Enter
This allows setting an Gateway IP Address for
LAN configuration.
Enter for Gateway
IP Address
Configuration.