User`s guide

40 KTC5520/EATX
www.kontron.com
5.1.4.2 Drive Configuration sub-menu
5.1.4.2.1 AHCI Configuration sub-menu
Feature Options Description Setup Help
SATA#1 Configuration
Disabled
Compatible
Enhanced
Compatible mode is for IDE mode.
Enhanced mode is to control AHCI or RAID
modes.
Configure SATA#1 as
IDE
RAID
AHCI
When SATA #1 is in enhanced mode, the AHCI
or RAID modes can be set.
AHCI: allows advanced
SATA features such as
Native Command
Queuing and hot plug.
IDE is legacy disk
usage.
Note: Any changes
need a restart to
apply in setup.
SATA#2 Configuration
Disabled
Enhanced
Enhanced mode is to control AHCI or RAID
modes.
AHCI Configuration N/A
Press Enter to go to sub screen "AHCI
Configuration".
Section for
AHCI Configuration.
IDE Configuration N/A
Press Enter to go to sub screen "IDE
Configuration".
Configure the IDE
device(s).
Feature Options Description Setup Help
AHCI BIOS Support
Enabled
Disabled
Support AHCI mode during BIOS control.
Enables for supporting
AHCI controller operates
in AHCI mode during
BIOS control otherwise
operates in IDE mode.
AHCI Port0 N/A Press Enter to go to sub screen "AHCI Port0".
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
AHCI Port1 N/A Press Enter to go to sub screen "AHCI Port1".
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.