User`s guide

19 KTC5520/EATX
www.kontron.com
3.2.4.2 Installing the Memory
It is highly recommended to populate equally the memory for each CPU beginning with channel 0.
Figure 3-5: Memory and CPU association
WARNING
Unplug the power supply before manipulating the dimms
WARNING
Because static electricity can cause damage to electronic devices, take the following
precautions:
Wear a grounding wrist strap before removing the board from its package; this will
discharge any static electricity that may have built up in your body.
CPU 1
CPU 0
Audio
RJ45 LAN1
USB
RJ45 LAN2
USB
PS2 kbd
mouse
VGA
Serial
CPU1 Fan
CPU0 Fan
EATX POWER
EATX 12V
EATX 12V
PCI Express Gen2 x8
Mem1
Fan
Sys3
Fan
LAN 2
LAN1
Slot 6
DDR 3 ECC Registered Channel 2 Slot 0
DDR 3 ECC Registered Channel 1 Slot 0
DDR 3 ECC Registered Channel 0 Slot 0
Fill Fi rst
Fill Fi rst
Fill Fi rst
DDR 3 ECC Registered Channel 2 Slot 1
DDR 3 ECC Registered Channel 1 Slot 1
DDR 3 ECC Registered Channel 0 Slot 1
Fill Second
Fill Second
Fill Second
DDR 3 ECC Registered Channel 0 Slot 0
DDR 3 ECC Registered Channel 1 Slot 0
DDR 3 ECC Registered Channel 2 Slot 0
Fill First
Fill First
Fill First
DDR 3 ECC Registered Channel 0 Slot 1
DDR 3 ECC Registered Channel 1 Slot 1
DDR 3 ECC Registered Channel 2 Slot 1
Fill Second
Fill Second
Fill Second