User`s guide

84 KTC5520/EATX
www.kontron.com
5.1.8 Exit menu
Feature Options Description Setup Help
Save Changes and Exit Enter
Saves modified settings into non-volatile
memory and reboots the system.
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Discard Changes and Exit Enter
Discards modifications to settings and reverts
to the state when Setup was entered, then
complete remaining POST.
Exit system setup
without saving any
changes.
ESC key can be used
for this operation.
Discard Changes Enter
Discards modifications to settings and reverts
to the state when Setup was entered.
Discards changes
done so far to any of
the setup questions.
F7 key can be used
for this operation.
Load Optimal Defaults Enter Loads the factory default settings.
Load Optimal Default
values for all the
setup questions.
F9 key can be used
for this operation.
Load Failsafe Defaults Enter
Loads the factory failsafe settings.
These settings could be used when the board is
not operating correctly.
Load Failsafe Default
values for all the
setup questions.
F8 key can be used
for this operation.
Save CMOS in FLASH
Disabled
Enabled
Saving CMOS memory content into Flash
Memory will prevent loosing CMOS options
when battery fails.
Saving CMOS memory
content into Flash
Memory will prevent
loosing CMOS options
when battery fails.