User`s guide

StorTrends® NAS Software (Version 2.2) User’s Guide
34
Step Description
4
If you want to enable Snapshots on your Volume, left click the box next to Enable Snapshot. Left click
the Apply button to continue and build the Volume.
Note: Depending on the RAID levels that you are going to use in for your Volume, the time it takes
to build the Volume can vary. RAID level 5 Volumes typically take longer to build than a
RAID level 0 Volume.
5
Congratulations! You have successfully created a Volume. The new Volume is now listed under the
Storage icon in the Storage Explorer menu. If you did not use all the available hard disk drives for your
Volume, the remaining hard disk drives are listed and made available for new Volumes. If no hard disk
drives are available, no hard disk drives are listed.
Deleting a Volume
Step Description