User`s guide

StorTrends® NAS Software (Version 2.2) User’s Guide
98
Set IP Address, Continued
Configuring TCP/IP, Continued
Step Action
4 Type the subnet mask you want the network interface card to use. Press the <ENTER> key to continue.
TcpIpConfiguration
EnterSubnetMask
Port:NIC0
ConfigurationMode:STATIC
IpAddress:
<Cancel>
<OK>
xxx.xxx.xx.xxx
xxx.xxx.xxx.x
5 Type the IP address of the gateway you want the network interface card to use. Press the <ENTER> key to
continue. This field must have an entry and cannot be left blank. If you do have a gateway installed on
your network, enter 0.0.0.0 for the value of this field.
TcpIpConfiguration
SubnetMask
Port:NIC0
ConfigurationMode:STATIC
IpAddress:
<Cancel>
<OK>
xxx.xxx.xx.xxx
xxx.xxx.xxx.x:
EnterGateway
xxx.xxx.xx.x
Cont’d