User`s guide

StorTrends® NAS Software (Version 2.2) User’s Guide
96
Set IP Address
AMINAS
(X)NIC0NetworkInterface-0
(
Selectone
)NIC1NetworkInterface-1
<OK>
<Cancel>
This screen allows you to configure TCP/IP automatically via DHCP server or by
specifying the addresses statically for the following:
• IP address (Server)
• Subnet Mask
• Default Gateway
• Primary DNS Server
• Secondary DNS Server
Configuring TCP/IP
To configure your NAS server with static settings, follow the steps in the following table.
Note: DHCP is not explained in this document due to the fact that DHCP is the default setting.
Step Action
1 Navigate to the network interface card you want to configure. Press the <ENTER> key to continue.
AMINAS
(X)NIC0NetworkInterface-0
(
Selectone
)NIC1NetworkInterface-1
<OK>
<Cancel>
Cont’d