User`s guide

Appendix B : Console User Interface
95
Set Host Name
HostNameConfiguration
HostName:NASxxxxxxxxxxxx
<OK>
<Cancel>
This subsection allows you to change the network name (host name) of your NAS server.
Changing the Host Name
Name Description
Host Name
The default system name is nasxxxxxxxxxxxx, where xxxxxxxxxxxx is the MAC
address. For example, if your MAC address is 00112233445566, then your NAS server’s
network name (host name) is nas00112233445566.
Empty field This field allows you to enter a unique host name to identify your NAS server on your
network. After you type in your NAS servers new host name, press the <ENTER> key.
Note: The host name must be a minimum of eight characters and a maximum of sixteen
characters. The host name is not case-sensitive. Parenthesis, slashes, asterisks, spaces, the
at sign (@), and the hash sign (#) are not allowed. The at sign (@) and the hash sign (#)
characters have special meanings on some UNIX based servers.
HostNameConfiguration
SettingHostNameDone...
HostName:NEW_HOST_NAME
Successfully
<OK>
You are prompted with a confirmation screen stating that the host name was renamed
successfully. To go back to main menu, press the <ENTER> key.