User manual

57 PCE-5125 User Manual
Chapter 3 AMI BIOS Setup
This allows user to enable or disable Boot Block HECI messaging between
system BIOS code and ME code.
– HECI Message
This allows user to enable or disable HECI messaging between system BIOS
code and ME code.
– End of POST S5 HECI Message
Enabling this will let system BIOS code to inform ME code ending of POST
S5 via HECI messaging.
! ME HECI Configuration
– ME-HECI
This allows user to enable or disable HECI function of ME.
– ME-IDER
This allows user to enable or disable IDE redirection function of ME.
– ME-KT
This allows user to enable or disable KT function of ME.
3.2.7 Exit Option
Figure 3.24 Exit option