User manual

43 PCE-5125 User Manual
Chapter 3 AMI BIOS Setup
3.2.2.3 Super I/O Configuration
Figure 3.6 Super I/O configuration
! OnBoard Floppy Controller
This option allows the BIOS to Enable or Disable the floppy controller.
! Floppy A
Select the type of floppy drive connected to the system. We suggest you disable
the floppy while installing Windows Vista without a floppy drive.
! Floppy B
Select the type of floppy drive connected to the system.
! Serial Port1 Address
This option configures serial port 1 base addresses.
! Serial Port2 Address
This option configures serial port 2 base addresses.
! Serial port2 Mode
This option configures serial port 2 mode.
! Parallel Port Address
This configures parallel port base addresses. The following options are also
available:
! Parallel Port Mode
This option configures Parallel Port mode. Available options include Normal, Bi-
directional, ECP, EPP, ECP & EPP.
! Parallel Port IRQ
This option configures Parallel Port base IRQ.