User manual

5 PCE-5125 User Manual

Chapter 1 Hardware Configuration

1.3.5 Ethernet LAN

! Supporting single/dual 10/100/1000 Mbps Ethernet port(s) via the dedicated

PCI Express x1 bus which provides 500 MB/s data transmission rate.

! Controller:

– LAN 1: Intel® 82578DM for all SKUs.

– LAN 2: Intel® 82583V for QG2 SKU; Intel 82574L for WG2 SKU.

1.3.6 Industrial features

! Watchdog timer: Can generate a system reset or IRQ11. The watchdog timer

is programmable, with each unit equal to one second or one minute (255 lev-

els).

1.3.7 Mechanical and environmental specifications

! Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU)

! Storage temperature: -40 ~ 85° C (-40 ~ 185° F)

! Humidity: 20 ~ 95% non-condensing

! Power supply voltage: +3.3 V, +5 V, +12 V, +5 V

! Power consumption: Processor: Intel Core i7 860; Memory: 2 DDR3 1333

MHz 2 GB DIMMs

Voltage +12 V +5 V +3.3 V +5 V

Current 12.156 A 15.576 A 12.108 A 0.024 A

! Board size: 338.58 mm (L) x 126.39 mm (W) (13.3" x 4.98")

! Board weight: 0.490 kg

1.4 Jumpers and Connectors

Connectors on the PCE-5125 single host board link it to external devices such as

hard disk drives and a keyboard. In addition, the board has a number of jumpers

used to configure your system for your application.

The tables below list the function of each of the board jumpers and connectors. Later

sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-

tions for connecting external devices to your motherboard.

Table 1.1: Jumper list

Label Function

JCMOS1 CMOS clear

JWDT1 Watchdog Reset

JOBS1 HW Monitor Alarm