User`s manual

BIOS SETUP
26 MI941 User’s Manual
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
IDE Configuration
Options:
Disabled
Compatible
Enhanced
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
ATA/IDE Configuration [Compatible]
Legacy IDE Channels [SATA Pri, PATA Sec]
► Primary IDE Master : [Not Detected]
► Primary Slave Master : [Not Detected]
► Secondary IDE Master : [Hitachi HDS72]
► Secondary IDE Slave : [Not Detected]
IDE Detect Time Out (Sec) [35]
The IDE Configuration menu is used to change and/or set the
configuration of the IDE devices installed in the system.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Configure Win627DHG Super IO Chipset
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Restore on AC Power Loss [Power Off]
Power On Function [None]
Onboard Serial Port
The default values are:
Serial Port 1: 3F8/IRQ4 Serial Port 2: 2F8/IRQ3
Restore on AC Power Loss
This field sets the system power status whether on or off when power
returns to the system from a power failure situation.
Power On Function
This field is related to how the system is powered on . The options are
None, Mouse Left, Mouse Right, and Any Key.