User`s manual

BIOS SETUP
34 MI801 User’s Manual
Advanced Chipset Settings
This setting configures the north bridge, south bridge and the ME
subsystem. WARNING! Setting the wrong values may cause the system
to malfunction.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security
Chipset
Exit
Advanced Chipset Settings
Configure North Bridge
features.
<- Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below sections
may cause system to malfunction.
► North Bridge Configuration
► South Bridge Configuration
BIOS SETUP UTILITY
Chipset
North Bridge Chipset Configuration
Options
Enabled
Disabled
<- Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
PCI MMIO Allocation: 4GB To 3072MB
Configure DRAM Timing by SPD [Enabled]
Initiate Graphics Adapter [IGD]
Internal Graphics Mode Select [Enabled, 8MB]
PEG Port Configuration
► Video Function Configuration
Configure DRAM Timing by SPD
When this item is enabled, the DRAM timing parameters are set
according to the DRAM SPD (Serial Presence Detect). When disabled,
you can manually set the DRAM timing parameters through the DRAM
sub-items.