User`s guide

Chapter 2 AMIBIOS Setup 65
Peripheral Setup, Continued
Parallel Port DMA Channel This option is available only if the setting for
the Parallel Port Mode option is ECP. This option sets
the DMA channel used by the parallel port. The settings
are Auto, (DMA Channel) 1, or 3.
EPP Version This option specifies the Enhanced Parallel Port
specification version number that is used in the system.
This option appears only if the Parallel Port Mode option
is set to EPP. The settings are 1.7, 1.9, and N/A.
There are no Optimal and Fail-Safe default settings
because the default setting for the Parallel Port Mode
option is not EPP. If the Parallel Port Mode is set to
Normal or ECP, then N/A displays.