User`s guide

Chapter 2 AMIBIOS Setup 63
Peripheral Setup, Continued
Primary\Secondary This option specifies the PSI/ISA IDE cards used by
the offboard IDE controller. The settings are Disabled,
Primary, Secondary, or Both. The Optimal and Fail-Safe
default settings are Both.
PCI IDE Card Primary IRQ This option specifies the primary IRQ used
by the PCI IDE card. The setting is IRQ14. The Optimal
and Fail-Safe default settings are IRQ14.
PCI IDE Card Secondary IRQ This option specifies the secondary IRQ
used by the PCI IDE card. The setting is IRQ15. The
Optimal and Fail default settings are IRQ15.
Onboard Serial Port1 IRQ This option specifies the IRQ used by serial
port 1. The settings are Disabled, or IRQ4. The Optimal
and Fail-Safe default settings are IRQ4.
Onboard Serial Port1 This option specifies the base I/O port address of
serial port 1. The settings are Auto (AMIBIOS
automatically determines the correct base I/O port
address), Disabled, 3F8h/COM1, or 3E8h/COM3. The
Optimal and Fail-Safe default settings are Auto.
Serial Port1 FIFO The settings are Disabled or Enabled. The Optimal and
Fail-Safe default settings are Disabled.
Onboard Serial Port2 IRQ This option specifies the IRQ used by serial
port 2. The settings are Disabled, or IRQ3. The Optimal
and Fail-Safe default settings are IRQ3.
Onboard Serial Port2 This option specifies the base I/O port address of
serial port 2. The settings are Auto (AMIBIOS
automatically determines the correct base I/O port
address), Disabled, 3F8h/COM1, 2F8h/COM2,
3E8h/COM3, or 2E8h/COM4. The Optimal and Fail-Safe
default settings are Auto.
Cont’d