User`s guide

MegaRUM II PCI Motherboard User’s Guide

Power Management Setup, Continued

Standby Time Out This option specifies the length of a period of system

inactivity while in Full power on state. When this length

of time expires, the computer enters Standby power state.

The settings are Disabled, 4 min, 8 min, up to and

including 508 minutes, in increments of 4 minutes. The

Optimal and Fail-Safe default settings are Disabled.

Suspend Time Out This option specifies the length of a period of system

inactivity while in Standby state. When this length of time

expires, the computer enters Suspend power state. The

settings are Disabled, 4 min, 8 min, up to and including

508 minutes, in increments of 4 minutes. The Optimal and

Fail-Safe default settings are Disabled.

Slow Clock Ratio This option specifies the speed at which the system clock

runs in the Standby Mode power saving state. The settings

are expressed as a percentage between the normal CPU

clock speed and the CPU clock speed when the computer

is in the power-conserving state. The settings are 0 -

12.5%, 12.5% - 25%, 25% - 37.5%, 37.5% -50% , 50% -

62.5%, 62.5% - 75%, or 75% -87.5%. The Optimal and

Fail-Safe default settings are 50% - 62.5%.

Display Activity When set to Monitor, this option enables event monitoring

on the video display. If set to Monitor and the computer is

in a power saving state, AMIBIOS watches for display

activity. The computer enters the Full On state if any

activity occurs. AMIBIOS reloads the Standby and

Suspend timeout timers if display activity occurs. The

settings are Monitor or Ignore. The Optimal and Fail-Safe

default settings are Ignore.

Cont’d