User`s guide

Chapter 2 AMIBIOS Setup 47
Advanced CMOS Setup, Continued
Boot To OS/2 Set this option to Yes if running OS/2 operating system
and using more than 64 MB of system memory on the
motherboard. The settings are Yes or No. The Optimal
and Fail-Safe default settings are No.
S.M.A.R.T. for Hard Disks Set this option to Enabled to permit AMIBIOS
to use the SMART (Self Monitoring Analysis and
Reporting Technology) protocol for reporting server
system information over a network. The settings are
Enabled or Disabled. The Optimal and Fail-Safe default
settings are Disabled.
Quick Boot Set this option to Enabled to instruct AMIBIOS to boot
quickly when the computer is powered on. The settings
are Disabled or Enabled. The Optimal and Fail-Safe
default settings are Disabled.
1
st
Boot Device This option sets the type of device for the first boot drives
that the AMIBIOS attempts to boot from after AMIBIOS
POST completes. The settings are Disabled, SCSI,
NETWORK, Floppy, ARMD-FDD, ARMD-HDD, ATAPI
CDROM, I2O, 1
st
IDE-HDD, 2nd IDE-HDD, 3
rd
IDE
HDD, or 4
th
IDE-HDD. The default setting is Floppy. The
Optimal and Fail-Safe default settings are Floppy.
2
nd
Boot Device This option sets the type of device for the second boot
drives that the AMIBIOS attempts to boot from after
AMIBIOS POST completes. The settings are Disabled,
SCSI, Floppy, ARMD-FDD, ARMD-HDD, ATAPI
CDROM, 1
st
IDE-HDD, 2nd IDE-HDD, 3
rd
IDE HDD, or
4
th
IDE-HDD. The default setting is Disabled. The
Optimal and Fail-Safe default settings are 1
st
IDE.
Cont’d