User`s guide

MegaRUM II PCI Motherboard User’s Guide
16
Step 8 Attach Cables, Continued
Cable Connector Ends When connecting chassis connectors to the
motherboard, make sure to connect the correct connector
end. Most connector wires are color-coded. Match the
color of the wires leaving the switch or LED to the same
pin on the connector end. There may be more than one
connector with the same color-coded wires. If so, follow
the wire to the switch or LED. All motherboard
components are outlined by a white rectangular box with a
broad arrow at one end. Pin 1 is always at the arrow end
of the white outlined box, as shown below:
Cont’d