User`s guide

Chapter 1 Hardware Installation

Step 5 Install CPU

The Pentium II CPUs are on Intel Slot1 adapter cards.

Insert the Slot1 cards into the CPU card sockets on the

motherboard. See the motherboard drawing on page 3 for

the location.

The CPU Slot1 sockets are below the SDRAM sockets, as

shown on page 3.

Warning

Improper CPU installation can damage the CPU and the

motherboard. You must follow the procedures in this

section exactly as documented. Make sure you wear an

antistatic wristband while installing the CPU. Follow all

antistatic procedures described on page 4.

Termination Card The MegaRUM II motherboard is shipped with a

termination card that should be installed in the empty

CPU slot if only one CPU is installed.

You must install the termination card in the empty CPU

slot if installing only one Pentium II CPU. The

motherboard will not power up unless both CPU slots are

occupied. The CPU slot where the termination card is

installed does not require a VRM.

Cont’d