User`s manual

INSTALLATIONS
Jumper Settings on MB966
JP1: TPM Enable/Disable Setting
JP1 Setting Function
Pin 1-2
Short/Closed
Enable
Pin 2-3
Short/Closed
Disable
JP2, JP3: Watchdog Timer & CN11~CN14 LAN Bypass
Settings
JP2, JP3 Setting Function
JP3 Pin 1-2 Open
& 3-4 Closed
JP2 Pin 1-2 Closed
System will bypass LANs &
Reboot upon the time out of
watchdog timer.
(DEFAULT)
JP3 Pin 1-2 & 3-4
Open
JP2 Pin 1-2 Closed
System will bypass LANs
upon the time out of
watchdog timer.
JP3 Pin 1-2 & 3-4
Open
JP2 Pin 2-3 Closed
System LANs bypass
function controlled by SIO
GPIO23.
MB966 User’s Manual 11