MB961 Series Intel 2nd Gen. CoreTM i Desktop CPU + H61/Q67 Sugar Bay based Micro ATX MB USER’S MANUAL Version 1.
Acknowledgments AMI is a registered trademark of American Megatrends Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Intel® Core i are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Fintek is a registered trademark of Fintek Electronics Corporation. All other product names or trademarks are properties of their respective owners.
Table of Contents Introduction ...................................................... 1 Product Description ............................................................ 1 Checklist............................................................................. 2 MB961 Series Specifications.............................................. 3 Board Dimensions .............................................................. 5 Installations ...................................................... 6 Installing the CPU ...
This page is intentionally left blank.
INTRODUCTION Introduction Product Description The MB961 Series Micro ATX motherboard is based on the latest Intel® ® H61/Q67 Express chipset. The platform supports 2nd generation Intel Core™ processor family with LGA1155 packing and features an integrated dual-channel DDR3 memory controller as well as a graphics core. The latest Intel processors provide advanced performance in both computing and graphics quality.
INTRODUCTION Checklist Your MB961 Series package should include the items listed below.
INTRODUCTION MB961 Series Specifications Product Name Form Factor CPU Type CPU Speed Cache Size CPU Socket Chipset BIOS Memory VGA LAN USB Serial ATA Audio LPC I/O Digital IO MB961RF (Q67 based) MB961F (H61 based) MB961 (H61 based) Micro ATX ® nd TM ® ® Intel 2 generation Core i7/i5/i3/Pentium /Celeron DT processor TDP for QC= 95W/65W/45W;DC= 65W/35W [Package = FC-LGA10, 37.5 mm x 37.5mm] Up to 3.40 GHz Up to 8MB shared L2 Cache LGA1155 (Socket H2) Intel® BD82H61 PCH for MB961/MB961F (TDP=6.
INTRODUCTION Expansion Slots Edge Connector Onboard Header/Connec tor Watchdog Timer System Voltage Other RoHS Board Size 4 PCIe (16x) x1 PCIe (8x) x1 **Actual signal will be PCIe(4x) for MB961RF or PCIe(1x) for MB961/MB961F** PCI x 2 [Thru ITE8893 PCIe to PCI converter] Dual DB9 stack connector for COM #1, #2 DVI-I connector x1 Dual USB (3.0) stack connector x1 HDMI x1 (for MB961F/MB961RF only) RJ-45 GbE + dual USB (2.
INTRODUCTION [ Board Dimensions MB961 User’s Manual 5
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the MB961 Series in order to set up a workable system. The topics covered are: Installing the CPU ....................................................................... 7 Installing the Memory ................................................................. 8 Setting the Jumpers ..................................................................... 9 Connectors on MB961Series ........................
INSTALLATIONS Installing the CPU The MB961 Series board supports an LGA1155 Socket (shown below) for Intel Sandy Bridge processors. To install the CPU, unlock first the socket by pressing the lever sideways, then lift it up to a 90-degree. Then, position the CPU above the socket such that the CPU corner aligns with the gold triangle matching the socket corner with a small triangle. Carefully insert the CPU into the socket and push down the lever to secure the CPU. Then, install the heat sink and fan.
INSTALLATIONS Installing the Memory The MB961 Series board supports four DDR3 memory socket for a maximum total memory of 16GB in DDR3 DIMM memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1. Hold the DDR3 module so that the key of the DDR3 module aligned with that on the memory slot. 2.
INSTALLATIONS Setting the Jumpers Jumpers are used on MB961 Series to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on MB961 Series and their respective functions. Jumper Locations on MB961 Series ................................................... 10 JP1: COM1 RS232 RI/+5V/+12V Power Setting ...............................
INSTALLATIONS Jumper Locations on MB961 Series Jumpers on MB961 Series .............................................................. Page JP1: COM1 RS232 RI/+5V/+12V Power Setting ............................... 11 JP2: COM2 RS232 RI/+5V/+12V Power Setting ............................... 11 JP4: Flash Descriptor Security Override (Factory use only) ................ 12 JP5: LCD Panel Power Selection (MB961F/MB961RF only) ............. 12 JP6: Factory use only (Default: open) ..............................
INSTALLATIONS JP1: COM1 RS232 RI/+5V/+12V Power Setting JP1 Setting Pin 1-3 Short/Closed Pin 3-4 Short/Closed Pin 3-5 Short/Closed Function +12V RI +5V JP2: COM2 RS232 RI/+5V/+12V Power Setting JP2 Setting Pin 1-3 Short/Closed Pin 3-4 Short/Closed Pin 3-5 Short/Closed Function +12V RI +5V MB961 User’s Manual 11
INSTALLATIONS JP4: Flash Descriptor Security Override (Factory use only) JP4 Open Close Flash Descriptor Security Override Disabled (Default) Enabled JP5: LCD Panel Power Selection (MB961F/MB961RF only) JP5 LCD Panel Power +3.
INSTALLATIONS JP7: LCD Brightness +3.3V/+5V Power Setting (MB961F/MB961RF only) JP7 Setting +3.
INSTALLATIONS SW1: Panel Type Selection 5 4 8 1 (Default: Pin 4,3,2,1 (ON ON ON OFF)) (MB961F/MB961RF only) SW1-4 SW1-3 SW1-2 SW1-1 14 Panel Type ON ON ON ON 800*600 18bit 1ch ON ON ON OFF 1024*768 18bit 1ch * ON ON OFF ON 1024*768 24bit 1ch ON ON OFF OFF 1280*768 18bit 1ch ON OFF ON ON 1280*800 18bit 1ch ON OFF ON OFF 1280*960 18bit 1ch ON OFF OFF ON 1280*1024 24bit 2ch ON OFF OFF OFF 1366*768 18bit 1ch OFF ON ON ON 1366*768 24bit 1ch OFF ON ON OFF 1
INSTALLATIONS Connectors on MB961Series Connector Locations on MB961 Series .............................................. 16 CN3: COM1 and COM2 Serial Ports ................................................. 17 CN1: DVI-I Connector ...................................................................... 17 CN5: USB3.0 Connector ................................................................... 18 CN2: HDMI Connector (MB961F/MB961RF only) ........................... 18 CN7: Intel Gigabit LAN + USB 10/11 ....
INSTALLATIONS Connector Locations on MB961 Series 16 MB961 User’s Manual
INSTALLATIONS CN3: COM1 and COM2 Serial Ports Pin # Signal Name RS-232 R2-422 1 DCD TX2 RX TX+ 3 TX RX+ 4 DTR RX5 Ground Ground 6 DSR NC 7 RTS NC 8 CTS NC 9 RI NC 10 NC NC [ CN1: DVI-I Connector Signal Name DATA 2DATA 2+ Shield 2/4 DATA 4DATA 4+ DDC CLOCK DDC DATA CRT_VSYNC DATA 1DATA 1+ SHIELD 1/3 DATA 3DATA 3+ DDC POWER A GROUND 1 Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Pin # 16 17 18 19 20 21 22 23 24 C1 C2 C3 C4 C5 C6 MB961 User’s Manual RS-485 DATADATA+ NC NC Ground NC NC NC NC NC Signal Name
INSTALLATIONS CN5: USB3.0 Connector CN2: HDMI Connector (MB961F/MB961RF only) CN7: Intel Gigabit LAN + USB 10/11 CN6: Realtek Gigabit LAN + USB 2/3 CN4: HD Audio Connector CN8: LCD Backlight Connector (MB961F/MB961RF only) 1X4_2.
INSTALLATIONS CN9, CN11: SATA2 Connectors CN10, CN12: SATA2 or SATA3 Connectors MB961 supports SATA2 (3Gbps) MB961F supports SATA2 (3Gbps) and SATA3 (6Gbps) MB961 User’s Manual 19
INSTALLATIONS CH1, CH2: LVDS Connectors (1st channel, 2nd channel) (For MB961F/MB961RF only) 19 20 1 2 Signal Name TX0Ground TX1+5V/3.3V TX3TX2Ground TXC+5V/3.
INSTALLATIONS J3: Audio Pin Header for Chassis Front Panel Signal Name MIC IN_L MIC IN_R LINE_R Sense LINE_L Pin # 1 3 5 7 9 Pin # 2 4 6 8 10 Signal Name Ground DET Ground KEY Ground J4: ATX 12V Power Connector Pin # 1 2 3 4 Signal Name Ground Ground +12V +12V MB961 User’s Manual 21
INSTALLATIONS J5, J9, J12, J14: USB Connectors (J12 is supported by MB961RF only) Signal Name VCC D0D0+ GND KEY Pin # Pin # 1 2 3 4 5 6 7 8 9 10 Signal Name VCC D1D1+ GND NC J6, J8, DDR3 DIMM Sockets J10: Digital I/O Signal Name GND OUT3 OUT2 IN3 IN2 22 Pin # 1 3 5 7 9 Pin # 2 4 6 8 10 Signal Name VCC OUT1 OUT0 IN1 IN0 MB961 User’s Manual
INSTALLATIONS J11: LPC Connector (for debug use) J13: Parallel Port Connector (MB961 only) Signal Name Line printer strobe PD0, parallel data 0 PD1, parallel data 1 PD2, parallel data 2 PD3, parallel data 3 PD4, parallel data 4 PD5, parallel data 5 PD6, parallel data 6 PD7, parallel data 7 ACK, acknowledge Busy Paper empty Select Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 Pin # 14 15 16 17 18 19 20 21 22 23 24 25 26 Signal Name Auto Feed Error Initialize Select Ground Ground Ground Ground Ground Ground Groun
INSTALLATIONS J16, J17: COM3, COM4 RS232 Serial Ports Signal Name DCD, Data carrier detect TXD, Transmit data GND, ground RTS, Request to send RI, Ring indicator Pin # Pin # Signal Name 1 2 RXD, Receive data 3 4 DTR, Data terminal ready 5 6 DSR, Data set ready 7 8 CTS, Clear to send 9 10 Not Used J15: 24-pin ATX Power Connector Signal Name 3.3V -12V Ground PS-ON Ground Ground Ground -5V +5V +5V +5V Ground 24 Pin # 13 14 15 16 17 18 19 20 21 22 23 24 Pin # 1 2 3 4 5 6 7 8 9 10 11 12 Signal Name 3.
INSTALLATIONS J18: ACPI LED Connector (MB961 only) Pin # 1 2 3 4 Signal Name S1/S3 LED+ Ground S0 LED+ Ground J19: Front Panel Function Connector Signal Name Pin # Pin # Signal Name SPK NC GND SPK +(+5V) NC NC PWR_SW NC RST+ HDD LED - 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 PWR LED + NC PWR LED- (GND) NC GND GND PWR_SW NC RST-(GND) HDD LED + MB961 User’s Manual 25
INSTALLATIONS J20: SPI Connector (For debug use) J21: LPC signal connector Signal Name -SUSTAT SERIRQ GPIO Pin 1 3 5 Pin 2 4 6 Signal Name 3VDUAL NC Ground CPU_FAN1: CPU Fan Power Connector 1 4 Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection 4 Control 26 MB961 User’s Manual
INSTALLATIONS SYS_FAN1: System Fan1 Power Connector Pin # 1 2 3 Signal Name Ground +12V(MAX.
INSTALLATIONS PCI3, PCI4: PCI Slot 28 MB961 User’s Manual
BIOS SETUP BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction........................................................................... 30 BIOS Setup ...................................................................................... 30 Advanced Settings .......................................................................... 32 Chipset Settings.............................
BIOS SETUP BIOS Introduction The BIOS (Basic Input/Output System) installed in your computer system’s ROM supports Intel processors. The BIOS provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system. BIOS Setup The BIOS provides a Setup utility program for specifying the system configurations and settings.
BIOS SETUP Main Settings Aptio Setup Utility – Copyright © 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security BIOS Information Save & Exit Choose the system default language System Language [English] System Date [Tue 01/20/2009] Access Level Administrator → ← Select Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit System Language Choose the system default language. System Date Set the Date.
BIOS SETUP Advanced Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference.
BIOS SETUP PCI Latency Timer Value to be programmed into PCI Latency Timer Register. VGA Palette Snoop Enables or disables VGA Palette Registers Snooping. PERR# Generation Enables or disables PCI device to generate PERR#. SERR# Generation Enables or disables PCI device to generate SERR#. PCI Express Settings Change PCI Express devices settings.
BIOS SETUP Maximum Payload Set Maximum Payload of PCI Express Device or allow System BIOS to select the value. Maximum Read Request Set Maximum Read Request Size of PCI Express Device or allow System BIOS to select the value. ASPM Support Set the ASPM Level: Force L0s – Force all links to L0s State: AUTO – BIOS auto configure: DISABLE – Disables ASPM. Extended Synch If ENABLED allows generation of Extended Synchronization patterns.
BIOS SETUP ACPI Settings Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit ACPI Settings → ← Select Enable Hibernation Enabled ACPI Sleep State S1 (Suspend to R…) Lock Legacy Resources Disabled S3 Video Repost Disabled Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit Enable Hibernation Enables or Disables System ability to Hibernate (OS/S4 Sleep State).
BIOS SETUP Wake up event settings Aptio Setup Utility Main Advanced Chipset Wake system with Fixed Time Boot Security Save & Exit Disabled Wake up hour 0 Wake up minute 0 Wake up second 0 Wake on Ring Enabled Wake on PCI PME Enabled Wake on PCIE Wake Event Enabled → ← Select Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit Wake system with Fixed Time Enables or Disables System wake on alarm event.
BIOS SETUP CPU Configuration This section shows the CPU configuration parameters. Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit CPU Configuration Intel® Core ™ i7-3770 CPU @ 3.
BIOS SETUP Intel Virtualization Technology When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Hardware Prefetcher To turn on/off the Mid level Cache (L2) streamer Prefetcher. Adjacent Cache Line Prefetch To turn on/off prefetching of adjacent cache lines. SATA Configuration SATA Devices Configuration.
BIOS SETUP Shutdown Temperature Configuration Aptio Setup Utility Main Advanced Chipset APCI Shutdown Temperature Boot Security Save & Exit → ← Select Disabled Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit ACPI Shutdown Temperature The default setting is Disabled.
BIOS SETUP USB Configuration Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit USB Configuration USB Devices: 2 Hubs Legacy USB Support Enabled USB3.
BIOS SETUP EHCI Hand-off Enabled/Disabled. This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. Port 64/60 Emulation Enables I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes. USB Transfer time-out The time-out value for Control, Bulk, and Interrupt transfers. Device reset tine-out USB mass Storage device start Unit command time-out.
BIOS SETUP F81866 H/W Monitor Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit PC Health Status CPU temperature +41 C SYS temperature +35 C FAN1 Speed 4021RPM FAN2 Speed N/A Vcore +0.976V +5V +5.213 V +12V +12.408 V 1.5V +1.504 V VSB5V +4.992 V VCC3V +3.
BIOS SETUP CPU PPM Configuration Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit CPU PPM Configuration EIST Enabled Turbo Mode Enabled → ← Select Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit EIST Enable/Disable Intel SpeedStep. Chipset Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference.
BIOS SETUP PCH-IO Configuration This section allows you to configure the North Bridge Chipset. Aptio Setup Utility Main Advanced Chipset Boot Intel PCH RC Version 1.5.0.
BIOS SETUP PCI Express Configuration Main Advanced Chipset Boot Security Save & Exit PCI Express Configuration PCI Express Clock Gating Enabled DMI Link ASPM Control Enabled DMI Link Extended Synch Control Disabled PCIe-USB Glitch W/A Disabled Subtractive Decode Disabled ► PCI Express Root Port 1 ► PCI Express Root Port 2 ► PCI Express Root Port 3 PCI-E Port 4 is assigned to LAN ► PCI Express Root Port 5 ► PCI Express Root Port 6 ► PCI Express Root Port 7 ► PCI Express Root Port 8 → ← Sel
BIOS SETUP USB Configuration Main Advanced Chipset Boot Security Save & Exit USB Configuration EHCI1 Enabled EHCI2 Enabled USB Ports Per-Port Disable Control Disabled → ← Select Screen ↑↓ Select Item Enter: Select +- Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit EHCI1/2 Control the USAB EHCI (USB 2.0) functions. One EHCI controller must always be enabled. USB Ports Per-Port Disable Control Control each of the USB ports (0~13) disabling.
BIOS SETUP System Agent (SA) Configuration Aptio Setup Utility Main Advanced Chipset System Agent Bridge Name Boot Security Save & Exit IvyBridge System Agent RC Version 1.1.0.
BIOS SETUP Primary Display Select which of IGFX/PEG/PCI graphics device should be primary display or select SG for switchable Gfx. Internal Graphics Keep IGD enabled based on the setup options. DVMT Pre-Allocated Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by the internal graphics device. DVMT Total Gfx Mem Select DVMT 5.0 total graphics memory size used by the internal graphics device. Gfx Low Power Mode This option is applicable for SFF only.
BIOS SETUP Boot Settings This section allows you to configure the boot settings. Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Boot Configuration Setup Prompt Timeout 1 Bootup NumLock State On Quiet Boot Disabled Fast Boot Disabled CSM16 Module Version 07.
BIOS SETUP INT19 Trap Response Enable: Allows Option ROMs to trap Int 19. Boot Option Priorities Sets the system boot order. CSM parameters This section allows you to configure the boot settings.
BIOS SETUP Security Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio Setup Utility Main Advanced Chipset Security Boot Save & Exit Password Description If ONLY the Administrator’s password is set, then this only limit access to Setup and is only asked for when entering Setup. If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup.
BIOS SETUP Save & Exit Settings Aptio Setup Utility Main Advanced Chipset Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Save Changes and Reset → ← Select Discard Changes and Reset Save Options Save Changes Discard Changes Restore Defaults Save as User Defaults Restore User Defaults Save Changes and Exit Exit system setup after saving the changes. Discard Changes and Exit Exit system setup without saving any changes.
DRIVERS INSTALLATION Drivers Installation This section describes the installation procedures for software and drivers. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor where you made the purchase. The contents of this section include the following: Intel Chipset Software Installation Utility ................................. 54 VGA Drivers Installation ..........................................................
DRIVERS INSTALLATION Intel Chipset Software Installation Utility The Intel Chipset Drivers should be installed first before the software drivers to enable Plug & Play INF support for Intel chipset components. Follow the instructions below to complete the installation. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) 7 Series Chipset Drivers. 2. Click Intel(R) Chipset Software Installation Utility.
DRIVERS INSTALLATION 3. When the Welcome screen to the Intel® Chipset Device Software appears, click Next to continue. 4. Click Yes to accept the software license agreement and proceed with the installation process. 5. On the Readme File Information screen, click Next to continue the installation. 6. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect.
DRIVERS INSTALLATION VGA Drivers Installation NOTE: Before installing the Intel(R) Q77 Chipset Family Graphics Driver, the Microsoft .NET Framework 3.5 SPI should be first installed. To install the VGA drivers, follow the steps below. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) 7 Series Chipset Drivers. 2. Click Intel(R) Q77 Chipset Family Graphics Driver.
DRIVERS INSTALLATION 3. When the Welcome screen appears, click Next to continue. 4. Click Yes to to agree with the license agreement and continue the installation. 5. On the Readme File Information screen, click Next to continue the installation of the Intel® Graphics Media Accelerator Driver. 6. On Setup Progress screen, click Next to continue. 7. Setup complete. Click Finish to restart the computer and for changes to take effect.
DRIVERS INSTALLATION Realtek HD Audio Driver Installation Follow the steps below to install the Realtek HD Audio Drivers. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) 7 Series Chipset Drivers. 2. Click Realtek High Definition Audio Driver. 3. On the Welcome to the InstallShield Wizard screen, click Next to proceed with and complete the installation process. 4. The InstallShield Wizard Complete. Click Finish to restart the computer and for changes to take effect.
DRIVERS INSTALLATION LAN Drivers Installation 1. Insert the CD that comes with the board. Click Intel and then Intel(R) 7 Series Chipset Drivers. 2. Click Intel(R) PRO LAN Network Driver.
DRIVERS INSTALLATION 3. Click Install Drivers and Software. 4. When the Welcome screen appears, click Next. 5. Click Next to to agree with the license agreement. 6. Click the checkbox for Drivers in the Setup Options screen to select it and click Next to continue.
DRIVERS INSTALLATION Realtek LAN Controller Drivers Installation Follow the steps below to install the Realtek LAN Drivers. 1. Insert the CD that comes with the board. Click Intel, then LAN Card, and then Realtek Lan Controller Drivers. 2. Click Realtek RTL8111E LAN Drivers.
DRIVERS INSTALLATION [ 3.When the welcome screen to InstallShield Wizard appears, click Next to start the installation. 4.When the InstallShieldWizard has finished installing the Realtek LAN drivers, click Finish.
DRIVERS INSTALLATION 7. The wizard is ready to begin installation. Click Install to begin the installation. 8. When InstallShield Wizard is complete, click Finish.
DRIVER INSTALLATION Intel® Management Engine Interface Follow the steps below to install the Intel Management Engine. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) AMT 8.0 Drivers.
DRIVERS INSTALLATION 2. When the Welcome screen to the InstallShield Wizard for Intel® Management Engine Components, click the checkbox for Install Intel® Control Center & click Next. 3. Click Yes to to agree with the license agreement.
DRIVER INSTALLATION 4. When the Setup Progress screen appears, click Next. Then, click Finish when the setup progress has been successfully installed.
DRIVERS INSTALLATION ASMedia USB 3.0 Drivers 1. Insert the CD that comes with the board. Click Intel and then Intel(R) 6 Series Chipset Drivers. 2. Click Intel(R) PRO LAN Network Driver.
DRIVER INSTALLATION 2. When the Welcome screen to the InstallShield Wizard for Intel® Management Engine Components, click Next. 3. When InstallShield Wizard is complete, click Finish.
APPENDIX Appendix A. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used.
APPENDIX B. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board.
APPENDIX C. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumstances, the timer will count to zero and the selected outputs will be driven. Under normal circumstance, the user will restart the WDT at regular intervals before the timer counts to zero.
APPENDIX } //--------------------------------------------------------------------------void EnableWDT(int interval) { unsigned char bBuf; bBuf = Get_F81866_Reg(0x2B); bBuf &= (~0x20); Set_F81866_Reg(0x2B, bBuf); //Enable WDTO Set_F81866_LD(0x07); Set_F81866_Reg(0x30, 0x01); //switch to logic device 7 //enable timer bBuf = Get_F81866_Reg(0xF5); bBuf &= (~0x0F); bBuf |= 0x52; Set_F81866_Reg(0xF5, bBuf); Set_F81866_Reg(0xF6, interval); //count mode is second //set timer bBuf = Get_F81866_Reg(0xFA); bBuf
APPENDIX //--------------------------------------------------------------------------// // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. // //--------------------------------------------------------------------------#include "F81866.H" #include
APPENDIX unsigned char Get_F81866_Reg(unsigned char REG) { unsigned char Result; Unlock_F81866(); outportb(F81866_INDEX_PORT, REG); Result = inportb(F81866_DATA_PORT); Lock_F81866(); return Result; } //--------------------------------------------------------------------------- //--------------------------------------------------------------------------// // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED
