User manual

IMB-Q670 Micro-ATX Motherboard
Page 90

Disabled
Disable the serial port

Enabled DEFAULT
Enable the serial port
 Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto DEFAULT
The serial port IO port address and interrupt address
are automatically detected.

IO=2E0h;
IRQ=10
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10

IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11

IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11

IO=2D0h;
IRQ=10, 11
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ10, 11

IO=2D8h;
IRQ=10, 11
Serial Port I/O port address is 2D8h and the interrupt
address is IRQ10, 11

IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11
5.3.8 H/W Monitor
The H/W Monitor menu (BIOS Menu 12) contains the fan configuration submenus and
displays operating temperature, fan speeds and system voltages.