Specifications

3-10
EMB-B75A
SLP_S4 Assertion Width [Enabled]
Allows you to set the minimum assertion width of the SLP_S4 signal.
Congurationoptions:[1-2seconds][2-3seconds][3-4seconds][4-5seconds]
Restore AC Power Loss [Last State]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system
state was before the AC power loss.
3.4.2 SystemAgent(SA)Conguration
CHAP Device (B0:D7:F0 [Disabled]
Allows you to enable or disable the SA CHAP device.
Congurationoptions:[Enabled][Disabled]
Thermal Device (B0:D4:F0) [Disabled]
Allows you to enable or disable the SA Thermal device.
Congurationoptions:[Enabled][Disabled]
Enable NB CRID (B0:D4:F0) [Disabled]
Allows you to enable or disable the NB CRID workaround function.
Congurationoptions:[Enabled][Disabled]
BDAT ACPI Table Support [Disabled]
Allows you to enable or disable the BDAT ACPI table.
Congurationoptions:[Enabled][Disabled]
C-State Pre-Wake [Disabled]
Allows you to enable or disable the C-State Pre-Wake feature.
Congurationoptions:[Enabled][Disabled]
GraphicsConguration
Allowsyoutocongurethegraphicssettings.
DMIConguration
Allows you to control various DMI functions.
NBPCIeConguration
AllowsyoutoconguretheNBPCIExpresssettings.