User manual

ICE-QM871 COM Express Module
Page 142
Step 2: Enter the Intel® current ME password as it requires (Figure B-10). Enter the IEI
factory ME password: Abab12!@ (the Intel® default password is admin).
NOTE:
The default Intel® ME password is admin. The IEI has reset the
password to Abab12!@ in quality control process. After clearing the
CMOS, the ME password bound to Intel® default password (admin).
Use Intel® default password to enter the Intel® ME BIOS and change
the password (refer to Step 3 below) to be able to configure the Intel®
AMT and ME options.
Figure C-2: Intel® Current ME Password
Step 3: To change the password, select Change Intel® ME Password. Enter a new
password following the strong password rule (containing at least one upper case
letter, one lower case letter, one digit and one special character, and be at least
eight characters). (
Figure B-11)