User guide

3-3

3.1.2 Attaching the rack rails

To attach the rack rails

1. Place the two front rail rack joints into the rear rail rack slots, as shown in the



 



adjust the length of the rack rails to meet the depth of the server rack.

Front rail rackRear rail rack



Rear rail rack slots

7. Secure the front end of the rail with

two rack screws, as shown in the



8. Secure the rear end of the rail with

two rack screws, as shown in the



9. Fasten the eight screw you secure





 

and attach the rack rail on the other

side.

 

barebone server.

 

 

 

the rack rail goes to the front of the rack space.