User guide

 
User Password
If you have set a user password, you must enter the user password for accessing
the system.
The User Password item on top of the screen shows the default Not
Installed. After you set a password, this item shows Installed.
To set a user password:
1. Select the
User Password item and press <Enter>.
 
Create New Password box, key in a password, then press
<Enter>.
 
To change a user password:
1. Select the
User Password item and press <Enter>.
 
Enter Current Password box, key in the current password, then
press <Enter>.
3. From the
Create New Password box, key in a new password, then press
<Enter>.
 
To clear the user password, follow the same steps as in changing a user password,

the password, the User Password item on top of the screen shows Not Installed.
To clear the administrator password, follow the same steps as in changing an

password. After you clear the password, the
Administrator Password
item on top
of the screen shows
Not Installed
.
5.10 Tool menu

item then press <Enter> to display the submenu.


ASUS EZ Flash 2 Utility

Check section 5.1.2 ASUS EZ Flash 2 Utility for details.


