User manual
Chapter 4 Install the Drivers
CPC-3713CLD3N - 27 -
BIOS configures the time sequence of the SDRAM according to the contents of
the SPD chip. Most of the memory module has one small chip to save the time
sequence and capacity of the memory, i.e. the SPD chip.
Boot Display Device
This option is used to specify the boot-up priority of the graphics device type.
Flat Panel Type
This option is used to choose the LVDS Panel type.
UserDefine Panel Type
This option is used to set the user-defined LVDS Panel type.
VGA Port Switch
This option is used to control the display function of the VGA connector on
front panel or rear panel.
PCIPnP
BIOS SETUP UTILITY
Advanced PCI/PnP Settin
g
s
WARNING: Setting wrong values in below sections
ma
y
cause s
y
stem to malfunction.
IRQ3 [Available]
IRQ4 [Available]
IRQ5 [Reserved]
IRQ7 [Available]
IRQ9 [Available]
IRQ10 [Available]
IRQ11 [Available]
IRQ14 [Available]
IRQ15 [Available]
←→ Select Screen
↑↓ Select Item
+ - Change Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61
(
c
)
Co
py
ri
g
ht 1985-2006
,
American Me
g
atrends
,
Inc.
IRQ3 ~ 15
This option is used to specify whether the IRQ number is PNP mode or reserved
for ISA.