User manual

Chapter 4 Install the Drivers
- 26 - CPC-3713CLD3N
 Clock Generator Configuration
BIOS SETUP UTILITY
Configure Clock Generator
Spread Spectrum [Enabled]
←→ Select Screen
↑↓ Select Item
+ - Change Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (c)Copyright 1985-2006, American Megatrends, Inc.
 Spread Spectrum
This option is used to control the spread spectrum function of the clock signal.
 Chipset
BIOS SETUP UTILITY
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
N
orth Bridge Chipset Configuration
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Boot Display Device [CRT+LVDS]
Flat Panel Type [800X600/S/18/G104S]
UserDefine Panel Type [Disabled]
South Bridge Chipset Configuration
VGA Port Switch [Front Panel]
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (c)Copyright 1985-2006, American Megatrends, Inc.
 DRAM Frequency
Configure the frequency for DRAM; it is recommended to use automatic
modification instead of manual modification; otherwise, it will not be able to
power on because it is not supported by DRAM.
 Configure DRAM Timing by SPD