User manual

Chapter 4 Install the Drivers
- 24 - CPC-3713CLD3N
 Floppy A
Configure the floppy driver type.
 OnBoard Floppy Controller
Used to enable the floppy controller.
 Serial Port 1 ~ 3 Address
Set the addresses of COM1 ~ 3 on motherboard.
 Serial Port 1 ~ 3 IRQA
Set the IRQs of COM1 ~ 3 on motherboard.
 Hardware Health Configuration
BIOS SETUP UTILITY
Hardware Health Configuration
System Temperature : 30°C/86°F
CPU Temperature : 37°C/98°F
Vcore : 1.136 V
V3.3 : 3.296 V
V5.0 : 5.094 V
V12.0 : 12.196 V
VBAT : 3.152 V
Enables Hardware
Health Monitoring
Device
←→ Select Screen
↑↓ Select Item
+ - Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (c)Copyright 1985-2006, American Megatrends, Inc.
 System Temperature
Current system temperature, it is monitored by thermal resistor on motherboard.
 CPU Temperature
Current CPU temperature, it is monitored by the temperature sensor on board.
 CPUFAN1
Current CPU fan speed.
 Vcore