User manual

Chapter 4 Install the Drivers

CPC-3713CLD3N - 23 -

ARMD: used for various analog IDE devices.

﹡LBA/Large Mode

Used to set whether to support LBA mode or not.

﹡Block(Multi-sector Transfer)

Used to set whether to support multi-sector simultaneous transfer or not.

﹡PIO Mode

Used for PIO mode setting.

﹡DMA Mode

Used for DMA mode setting.

﹡S.M.A.R.T

Used to set whether to enable S.M.A.R.T function and it is only effective for the

hard disk supporting this function.

﹡32Bit Data Transfer

This option is used to enable 32-bit hard disk accessing mode, which could

optimize hard disk read and write speed.

 Super I/O Configuration

BIOS SETUP UTILITY

Confi

ure Su

er I

O Chi

set

Floppy A [Disabled]

OnBoard Floppy Controller [Enabled]

Serial Port1 Address [3F8]

Serial Port1 IRQ [IRQ4]

Serial Port2 Address [2F8]

Serial Port2 IRQ [IRQ4]

Serial Port3 Address [3E8]

Serial Port3 IRQ [IRQ3]

Allows BIOS to Enable or

Disable Floppy Controller.

←→ Select Screen

↑↓ Select Item

+ - Change Field

Tab Select Field

F1 General Help

F10 Save and Exit

ESC Exit