User`s guide

Install the Processor
This mainboard has a Slot-1 which can be installed with any Slot-1
processor cartridge including the Pentium-III, the Pentium-II, and
the SEPP Celeron. It also has a Socket-370 which can be installed
with the new Celeron processor which is shipped in a PPGA
(Plastic Pin Grid Array) package. To ensure reliability, make
sure that your PPGA Celeron processor is fitted with a
heatsink/cooling fan assembly.
You can install a Slot-1 processor or a PPGA Celeron. You cannot
install a PPGA and a Slot-1 processor cartridge together. Take care
that you do not try to install a Socket-7 processor into the Socket-
370. A Socket-7 processor such as the Pentium-MMX, or the AMD
K5/K6 does not fit in the socket-370. The following table lists the
processors that are currently supported by this mainboard. New
processors may be a released after this manual is printed.
Processor
Cartridge
Clock Rate
MHz
Processor
Socket
System Bus
MHz
Pentium-III 550 Slot-1 100
Pentium-III 500 Slot-1 100
Pentium-III 450 Slot-1 100
Pentium-II 450 Slot-1 100
Pentium-II 400 Slot-1 100
Pentium-II 350 Slot-1 100
Pentium-II 333 Slot-1 66
Pentium-II 300 Slot-1 66
Pentium-II 266 Slot-1 66
Pentium-II 233 Slot-1 66
SEPP Celeron 433 Slot-1 66
SEPP Celeron 400 Slot-1 66
SEPP Celeron 366 Slot-1 66
SEPP Celeron 333 Slot-1 66
SEPP Celeron 300A Slot-1 66
SEPP Celeron 300 Slot-1 66
SEPP Celeron 266 Slot-1 66
PPGA Celeron 466 Socket-370 66
PPGA Celeron 433 Socket-370 66
PPGA Celeron 400 Socket-370 66
PPGA Celeron 366 Socket-370 66
PPGA Celeron 333 Socket-370 66
PPGA Celeron 300 Socket-370 66