Specifications

EISA Configuration Utility
5.6.1 Change Configuration Settings
When you choose a configuration setting to change by moving the cursor to
the appropriate adapter card and pressing < Enter >, the following screen
appears:
ям тел MB^rf
Slot 1 - Empty
Slot 2
-Empty
Slot 3 - Empty
Slot 4 - Empty
Slot 5 - Empty
Slot 6 - Empty
Slot 7 - Empty
SlotS
- Empty
- This step is optional, you may skip it by pressing ESC and all
configuration settings will remain unchanged.
- Press ENTER to view or change a board's configuration settings.
- Press ESC when you are satisfied with the current settings.
[Select = ENTER] {Done=ESC] [Advanced options=F9]
To change a function's choice setting, select one of the long horizontal bars
on the screen and press < Enter >. To change resource allocation settings,
select one of the shorter bars along the right edge of the screen. Select
<OK> or press <Esc> when you are finished editing this adapter card.
5-11